DNC Series ISO6431 Standard Cylinder

Ordering Code     DNC-63 x 50 -PPV-A - S2

DNC	63	50	PPV	A	S2
Model			Buffer	Magnet
DNC: Basic Type HNC: Axis Direction Foot Base FNC: Front and Back Flange ZNCF: Front and Back Axis Pin ZNCM: Middle Axis Pin SNCB: Single Earring Base SNCL: Double Earring Base	Cylinder Bore	Stroke	Blank: Non Buffer PPV: Attach Buffer	Blank: Standard Type A: Inside magnet	S2: Double Piston Rod K2: Lengthen Out Screw K3:Front in Screw Thread K5: Out Standard Screw Thread K8: Lengthen Piston Rod

Specification

Bore(mm)	32	40	50	60	80	100
Working Medium	Filtered Air
Motion Pattern	Double Action Type
Compression Pressure	1.5Mpa
Max Operating Pressure	1.0Mpa
Min. Operating Pressure	0.1Mpa
Buffer Type	Air Buffer(Standard)
Operating Temperature	5-60℃
Operating Speed	50～500mm/s
Stroke Tolerance(mm)	0～250((0～+1.0)   251～1000((0～+1.5)   1001～1500((0～+2.0)
Operating Life	Not Less than 4000Km
Lubrication	Not Necesssary
Joint Size	1/8”	1/4”		3/8”		1/2”

Stroke

Bore(mm)	Standard Stroke	Buffer Stroke	Max. Stroke Range
32	25 40 50 80 100 125 160 200 250 320 400 500	20	10-2000
40
50		22
63
80		32
100

Bore(mm)	Magnetism Switch Min.Stroke	Magnetism Switch Type
32	32	KCK2400C (Embedding Type)
40	40
50	50
63	63
80	80
100	100